Продукты Палтрогенс

 

You will respectfully be informed about specified code and products range details based on your correspondence to your sales expert.

 

Performance Index of Liquid Resin:

Type of resin (Gardner)(Sec) Unsaturated Polyester Resin – Ortho base
Appearance Clear Liquid
Gel time 10 – 25 min
Gel time terms —–
Peak Temperature Max 200 °C
Solid Content 62% – 66 %
Viscosity at 25 C 400 – 600 cP
Acid Value 10 – 20 mgKOH/g
Shelf life 6 Month

 

Mechanical properties:

Tensile Strength 60 – 75 MPa (Test Method ISO 527-2)
Elongation  3% – 4% (Test Method ISO 527-2)
Tensile modulus 700 – 1880 MPa (Test Method ISO 527-2)
Flexural Strength 110 – 130 MPa (Test Method ISO 178)
Flexural modulus 2450 – 3600 MPa (Test Method ISO 178)
HDT Min 65 °C (Test Method ASTM D648)
Hardness 40 – 45 Barcol (Test Method ASTM D2583)
Volumetric Shrink Max 3% (Test Method ASTM D2566)

 

Product Application:

Artificial Stone
Paltrogens
Cooling Towers
Flotations Products (Tixotrop & Pre-Accelerator)
GRP – FRP products
Multilayer sheets

 

Product Description:

Very good mechanical properties
Very good heat and chemical resistance
Good adhesion to fibers
Low water absorption
Medium viscosity
High impact resistance
Good flexibility

 

Shelf Life:
This product must be stored in its orginal sealed steel drum in a cold and dry place away from fire, heat source and direct sunlight in temperatures between 5-30 °C. Under these conditions, the shelf life of this product will be maximum 6 months from delivery time.

 

Packaging
200 Kg net in steel drum

 

Remark:
Solid content, Viscosity and other qualitative parameters, are customizable based on customer requirements.

Технические характеристики полиэстера
Acid Value Resin

10 – 20 mgKOH/g

Внешний вид Смола

Чистая жидкость

Время гелеобразования

10 – 25 min

Сроки нанесения геля

—–

Пиковая температура

Max 200 °C

Срок годности

6 месяцев

Полиэстер с твердым содержанием

62 – 66 %

Тип смолы (Гарднер)(сек)

Unsaturated Polyester Resin – Ortho base

Вязкость при 25 С

400 – 600 cP

Механические свойства
Elongation

3% – 4% (Test Method ISO 527-2)

Модуль упругости при изгибе

2450 – 3600 MPa (Test Method ISO 178)

Предел прочности при изгибе

110 – 130 MPa (Test Method ISO 178)

Твердость

40 – 45 Barcol (Test aMethod ASTM D2583)

HDT

Min 65 °C (Test Method ASTM D648)

Модуль упругости

700 – 1880 MPa (Test Method ISO 527-2)

Предел прочности

60 – 75 MPa (Test Method ISO 527-2)

Volumetric Shrink

3% (Test Method ASTM D2566)

Будьте первым, кто оставит отзыв “Продукты Палтрогенс”

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Пока нет отзывов.

ЕСТЬ ЛИ У ВАС ВОПРОСЫ?

ЗАДАЙТЕ НАМ СВОЙ ВОПРОС ПО ЭТОЙ ФОРМЕ